Constant Current Edge-lit LED Rigid Bar for Advertising Light Box
Product: SMD3030-20LED-20MM-10x25°
Uniform light distribution with 10×25° optical lens
Constant current technology ensures optimal brightness for each LED
Easy installation in different thickness lighting box, recommended thickness 6cm-10cm
Screw mounting for low installation and maintenance costs
DC 24V input, safe voltage for operation
Share
Specifications
Model No.
Size
Voltage
Power
Lumen
Ra
CCT
LED Type
LED QTY
Beam Angle
Model No.
RQW1210AN
Voltage
DC12V
Power
12w
Lumen
1500lm
Ra
>80
CCT
3000 – 6000K
LED Type
11V SMD2835
LED QTY
12LEDs
Beam Angle
170°
QTY/Chain
20pcs
ROC20E020D
960x20x12.7mm
DC24V
35W
2770lm
>70
6000-7000K
SMD3030
20LEDs
10°x25°
Dimensions
ROC20E020D
Applications
Introduction of Edge-lit LED Rigid Bar
Benifits from using concave optics lens, the solution of edge-lit LED rigid bar makes the installation of LED source so easy in lighting box, especially for double-sided sign box.
With optional beam angle lens, it presents different washing effect as wall washer.
- The Right Optical Lens
Edge-lit led rigid bar uses a 10°x25° high transmittance PMMA optics lens, its special light-emitting angle can improve diffuse reflection performance, which makes it suitable for light box with thickness over 6cm. Placing this strip on two opposite side of light box, even glow over the graphic.
- Built to Ultra-thin Light Box
170degree beam angle lens is the key to make your light box as thin as possible, even for 3cm thickness light box, the uniformity is admirable.
Meanwell, it provides you a possibility to adjust led bar distance to get ideal brightness.
Best solution for double sided light box, especially ultra-thin light box as thin as 6cm. Easy installation and maintanance for saving costs.
- High Efficiency Chips
To maximize the light bar efficiency, we use 3030 led chips with up to 170lm luminous flux, as higher brightness farther illuminated.
- Constant Current Design
This edge-lit LED rigid bar adopts triode constant current design, comparing with IC design, it costs less but allows all LED chips to run at same current which means providing intense and uniform illumination for light box. In the meanwhile, more strips can be connected together than constant voltage strips.
- Two LED Cuttable
The minimum unit of this strip is two LEDs, better to match different size of light box. It’s easy and convinient to reconnect with soldering pad on it as well.
- Easy Installation
Plug-in and plug-out connectors for fast connection.
Blue tape on the back for easy installation, it also helps conduct heat to light box duo to its high thermal conductivity.
Screw mounting is available for special cases.
- Installation Diagram
Edge-lit LED rigid bars are symmetrically placed on two opposite sides of light box, providing uniform lighting over both face of signs, suitable for 1m height and 6-10cm thickness light box.
- Wiring Diagram
Due to Constant Current Technology (CCT) design, the brightness is exactly the same at both ends, avoid brightness difference problem by voltage drop on Constant Voltage Technology (CVT) strip, much more strips can be connected together.
- Safe Voltage
Mostly, LED strip is operated at 12V or 24V DC, it’s a safe voltage to prevent from electric shock for operator. Select correct strip to match your exsiting driver, or you can select driver according to the strip.
DC24V
DC12V
