English 
简体中文 
Deutsch 
Español 
Français 
Italiano 
日本語 
한국어 
Polski 
Português 
Русский 
Türkçe 
العربية 
Nederlands 
Constant Current LED Edge-lit Rigid Strip for Double-sided Light Box
Product: SMD3535-12LED-24MM-10x35°
Uniform light distribution with 10×35° optical lens
Constant current technology ensures optimal brightness for each LED
Easy installation in different thickness lighting box, recommended thickness 10cm-20cm
Screw mounting for low installation and maintenance costs
DC24V input, safe voltage for operation
Share
Specifications
Model No.
Size
Voltage
Power
Lumen
Ra
CCT
LED Type
LED QTY
Beam Angle
Model No.
RQW1210AN
Voltage
DC12V
Power
12w
Lumen
1500lm
Ra
>80
CCT
3000 – 6000K
LED Type
11V SMD2835
LED QTY
12LEDs
Beam Angle
170°
QTY/Chain
20pcs
RHC24E012D
960x24x13.5mm
DC24V
36.5W
3570lm
>70
7000-7500K
SMD3535
12LEDs
10°x35°
Dimensions
RHC24E012D
Applications
Introduction of LED Edge-lit Rigid Strip
Benifits from using concave optics lens, the solution of edge-lit LED bar makes the installation of LED source so easy in lighting box, especially for double-sided sign box.
With optional beam angle lens, it presents different washing effect as wall washer.
- The Right Optical Lens
LED edge-lit rigid strip uses a 10°x35° high transmittance PMMA optics lens, its special light-emitting angle can improve diffuse reflection performance, which makes it suitable for light box with thickness over 10cm. Placing this strip on two opposite side of light box, even glow over the graphic.
- Built to Ultra-thin Light Box
170degree beam angle lens is the key to make your light box as thin as possible, even for 3cm thickness light box, the uniformity is admirable.
Meanwell, it provides you a possibility to adjust led bar distance to get ideal brightness.
Best solution for double sided light box, especially ultra-thin light box as thin as 10cm. Easy installation and maintanance for saving costs.
- High Efficiency Chips
To maximize the light bar efficiency, we use XPG3535 led chips with up to 400lm luminous flux, as higher brightness farther illuminated.
- Constant Current Design
This strip adopts IC constant current design, comparing with triode design, it power loss less and has a stable output, allows all LED chips to run at same current which means providing intense and uniform illumination for light box. In the meanwhile, more strips can be connected together than constant voltage strips.
- Cuttable
The minimum unit of this strip is six LEDs, better to match different size of light box. It’s easy and convinient to reconnect with soldering pad on it as well.
- Easy Installation
Plug-in and plug-out connectors for fast connection.
Blue tape on the back for easy installation, it also helps conduct heat to light box duo to its high thermal conductivity.
Screw mounting is available for special cases.
- Installation Diagram
Edge lit LED strips are symmetrically placed on two opposite sides of light box, providing uniform lighting over both face of signs, suitable for 1-2m height and 10-20cm thickness light box.
- Wiring Diagram
Due to Constant Current Technology (CCT) design, the brightness is exactly the same at both ends, avoid brightness difference problem by voltage drop on Constant Voltage Technology (CVT) strip, much more strips can be connected together.
- Safe Voltage
Mostly, LED strip is operated at 12V or 24V DC, it’s a safe voltage to prevent from electric shock for operator. Select correct strip to match your exsiting driver, or you can select driver according to the strip.
DC24V
DC12V
