LED Signage Lighting
- AC LED sign tube(retrofit tube)
- DC LED sign tube(retrofit tube)
- Daisy chain LED sign tube(retrofit tube)
- IP20 backlight LED strip(diffuse reflection LED strip)
- IP65 backlight LED strip(diffuse reflection LED strip)
- Single color flexible backlight LED strip(diffuse reflection LED strip)Â
- Tunable white flexible backlight LED strip(diffuse reflection LED strip)
- Constant voltage edgelit LED strip
- Constant current edgelit LED strip
- High power edgelit LED strip
- IP65 edgelit LED strip
LED Sign Tube, Retrofit Speed Lamp
Our UL-listed LED sign tubes are specifically designed to replace or retrofit traditional T12HO and T8 fluorescent lamps in LED signage lighting.
Constructed of durable PC plastic and aluminum, the T8 LED sign tube with G13 or R17D base is fitted with LEDs on both sides with optical lenses to provide 360° illumination. The optical design diffuses light to provide smooth, even light distribution while avoiding harsh hot spots. At the same time, our LED retrofit tubes require no external drivers or ballasts and can still be used with existing sockets, eliminating the need to waste time and resources replacing failed ballasts and allowing installers to utilize the rotatable G13 or R17D end caps to direct light where it’s needed.
LED sign tubes are commonly used in a variety of indoor and outdoor advertising light boxes, such as billboards, pylon billboards, and bus shelter advertising light boxes.
AC LED Sign Tube(Retrofit Tube)
Operates on AC input voltage, With internal drivers, it does not require any other power supply and ballast.
- Input Voltage: AC(100-277V or 220-240V)
- Length: 14 lengths for US, 6 lengths for EU
- Power: From 10W to 52W
- Driver: Internal driver by pass ballast
- Efficacy: 120lm/W
- CCT: 3000K, 4000K, 5000K, 6500K
- CRI: >80
- Beam Angle: 360°, 180°
- Base: Rotatable HO, Rotatable G13, FA8
- Wiring: Double-ended, Single-ended
- IP Rating: IP65
- Lifespan: 50,000 hours
- Warranty: 5 years
DC LED Sign Tube(Retrofit Tube)
DC tube does not come with internal driver, they can share the same external driver in a light box, much easier to be dimmed by controller.
- Input Voltage: DC24V
- Length: 14 lengths for US, 6 lengths for EU
- Power: From 10W to 52W
- Driver: N/A
- Efficacy: 120lm/W
- CCT: 3000K, 4000K, 5000K, 6500K
- CRI: >80
- Beam Angle: 360°, 180°
- Base: Rotatable HO, Rotatable G13, FA8
- Wiring: Single-ended
- IP Rating: IP65
- Lifespan: 50,000 hours
- Warranty: 5 years
- Certifications: CE, ROHS
Daisy Chain LED Sign Tube
Daisy Chain LED sign tube is a great solution for new signs installation, no need prewiring in raceway, simply connect them through its “Y” connectors, AC and DC both available. IP65 waterproof for damp location
- Input Voltage: AC or DC
- Length: 0.6m, 1.2m, 1.5m
- Power: 12W, 20W, 24W
- Driver: Internal driver for AC
- Efficacy: 110lm/W
- CCT: 3000K, 4000K, 5000K, 6500K
- CRI: >80
- Beam Angle: 360°, 180°
- Base: N/A
- Wiring: Daisy Chain
- IP Rating: IP65
- Lifespan: 30,000 hours
- Warranty: 3 years
- Certifications: CE ROHS
Nano LED T8 Tube, Eco T8 Tube Light for Signage Lighting and Commercial Lighting
Nano plastic T8 tubes are formulated with high strength, low thermal expansion coefficient (CTE) resins for improved dimensional and high temperature stability. Providing better optical and thermal performance than other plastic tube. Up to 130lm/W efficiency and wider beam angle to 150 degree. Meanwhile, they are economical and affordable tube, making them the perfect solution to replace fluorescent tubes for signage, residential and commercial lighting.
- Input Voltage: AC100-277V
- Length: 2ft, 4ft, 5ft
- Power: 9W, 18W, 22W
- Driver: Internal driver by pass ballast
- Efficacy: 120lm/W
- CCT: 3000K, 4000K, 5000K, 6500K
- CRI: >80
- Beam Angle: 150°
- Base: G13 or R17D, daisy chain connection is optional
- Lifespan: 30,000 hours
- Warranty: 3 years
- Certifications: CE ROHS
TRIAC Dimmable T8 LED Tube Light
TRIAC dimming T8 tube come with internal isolated driver, both forward phase or reverse phase dimming available for smooth and precise controlling over light intensity , perfectly compatible to traditional dimming switch without flicking. Aluminum housing + frosted PC diffuse, G13 base, single-end or double-end powered, by-pass ballast, instant-on start, 80 CRI, CCT selectable, over 120lm/W efficiency, an ideal solution for commercial, industrial, residential or signage lighting.
- Input Voltage: AC220-240V, AC110V
- Length: 2ft, 4ft, 5ft
- Power: 9W, 18W, 22W
- Driver: Internal driver by pass ballast
- Efficacy: 120lm/W
- CCT: 3000K, 4000K, 5000K, 6500K
- CRI: >80
- Beam Angle: 130°
- Base: G13
- Lifespan: 30,000 hours
- Warranty: 3 years
- Certifications: CE ROHS
LED Cooler/Freezer Tube, Walk-in Cooler Lights
LED cooler tubes are quick and easy replacements for fluorescent bulbs in walk-in coolers, reach-in coolers, freezers, and refrigerated display cases. They come with internal driver, 28W for 5ft and 36W for 6ft V-shape fridge light. Up to 130lm/W efficiency for saving money on electricity bill. IP65 water-proof for preventing moisture from damaging the lights. Easy installation with screws and easy connection by daisy chain connectors.
- Input Voltage: AC or DC
- Length: 5ft or 6ft
- Power: 28W, 36W
- Driver: Internal driver for AC
- Efficacy: 120lm/W
- CCT: 5000K, 6500K
- CRI: >80
- Beam Angle: 170°
- Wiring: Single Wire or Daisy Chain
- IP Rating: IP65
- Lifespan: 30,000 hours
- Warranty: 3 years
- Certifications: CE ROHS
Backlight Lens LED Strip
Diffuse reflection backlight LED bar offers wide-angle, soft illumination, perfect for creating uniform lighting across surface of signs. The 170° optic lens scatters light evenly, reducing harsh shadows and glare, making it ideal for applications like under-cabinet lighting, signage and luminous for stretch ceilings & walls. LED bars are 10pcs or 20pcs connected, taking much less installation work than LED modules. Up to 150lm/W high efficacy, for brighter light but less energy consumption. Available in single color and tunable color, IP20 and IP65 waterproof. Bar light for LED light box application: Fabric light box outdoor/Soffit box lighting/Light box signs outdoor/Stretched fabric light box/Backlit poster frame/LED advertising light box/Lighting fabric/Stretch ceiling/Fabric light ceiling/LED fabric light box.
IP20 Backlight LED Strip
- Input Voltage: DC12V/DC24V
- Length: 480mm, 960mm
- LED Chips: 12LEDs, 24LEDs, 1W SMD2835
- Power: 5W, 10W
- Efficacy: 150lm/W
- CCT: 3000K, 4000K, 5000K, 6500K
- CRI: >80
- Beam Angle: 170°
- Connector: 18AWG wire or 5557 connectors
- Wiring: Daisy Chain
- IP Rating: IP20
- Cut Section: 80mm, 160mm
- Lifespan: 30,000 hours
- Warranty: 3 years
- Certifications: CE ROHS
IP65 Backlight LED Strip
- Input Voltage: DC12V/DC24V
- Length: 480mm, 960mm
- LED Chips: 12LEDs, 24LEDs, 1W SMD2835
- Power: 5W, 10W
- Efficacy: 150lm/W
- CCT: 2700K-6500K, tunable white
- CRI: >80
- Beam Angle: 170°
- Connector: 18AWG wire or 5557 connectors
- Wiring: Daisy chain
- IP Rating: IP65
- Cut Section: 80mm, 160mm
- Lifespan: 30,000 hours
- Warranty: 3 years
- Certifications: CE ROHS
Flexible Backlight Lens LED Strip
Comparing to rigid backlight LED strip, diffuse reflection flexible backlight LED strip is bendable to fit irregular-shaped signs, also it’s widely used in linear lighting and luminous for stretch ceilings & walls. Zig-zag strip is available. Application: display, stretch ceiling, under-cabinet lighting, linear lighting.
Single Color Flexible Backlight LED Strip
- Input Voltage: DC12V/DC24V
- Length: 5000mm
- LED Chips: 12LEDs/m, 1W SMD2835
- Power: 12W
- Efficacy: 110lm/W
- CCT: 3000K, 4000K, 5000K, 6500K
- CRI: >80
- Beam Angle: 170°
- IP Rating: IP20
- Cut Section: 83.3mm/166.7mm
- Lifespan: 30,000 hours
- Warranty: 3 years
- Certifications: CE ROHS
Tunable White Flexible Backlight LED Strip
- Input Voltage: DC12V/DC24V
- Length: 5000mm
- LED Chips: 24LEDs/m, 1W SMD2835
- Power: 12W
- Efficacy: 110lm/W
- CCT: 2700K-6500K, tunable white
- CRI: >80
- Beam Angle: 170°
- IP Rating: IP20
- Cut Section: 83.3mm/166.7mm
- Lifespan: 30,000 hours
- Warranty: 3 years
- Certifications: CE ROHS
Edgelight Lens LED Strip
Edgelit LED strip uses narrow beam angle optic lens of 10*45°which enable it provides even light distribution to the surface of signs while setting it on the side board of signs, a great solution for single sided and double sided light box due to easy installation. Constant voltage edgelit light bar offers up to 150lm/W high efficacy, constant current edgelit light bar ensures consistent brightness, high power edgelit light bar provides sufficient light to big signs. Variety of beam angle lens for different application, IP20 for indoor signs, IP65 for outdoor signs, customizable on color, size, power, beam angle. Application: display, light box, wall washer.Â
Constant Voltage Edgelit LED Strip
- Input Voltage: DC12V/DC24V
- Length: 480mm/960mm
- LED Chips: 10LEDs/20LEDs, 1W SMD2835
- Power: 10W, 20W
- Efficacy: 150lm/W
- CCT: 3000K, 4000K, 5000K, 6500K
- CRI: >80
- Beam Angle: 10×45°
- IP Rating: IP20
- Cut Section: 48mm, 96mm
- Lifespan: 30,000 hours
- Warranty: 3 years
- Certifications: CE ROHS
Constant Current Edgelit LED Strip
- Input Voltage: DC12V/DC24V
- Length: 480mm, 960mm
- LED Chips: 10LEDs, 20LEDs, 1W SMD2835
- Power: 10W, 20W
- Efficacy: 140lm/W
- CCT: 3000K, 4000K, 5000K, 6500K
- CRI: >80
- Beam Angle: 10×45°
- IP Rating: IP20
- Cut section: N/A
- Lifespan: 30,000 hours
- Warranty: 3 years
- Certifications: CE ROHS
High Power Edgelit LED Strip
- Input Voltage: DC12V/DC24V
- Length: 480mm, 960mm
- LED Chips: 6LEDs, 12LEDs, 3W SMD3535
- Power: 18W, 36W
- Efficacy: 100lm/W
- CCT: 3000K, 4000K, 5000K, 6500K
- CRI: >80
- Beam Angle: 10×35°
- IP Rating: IP20
- Cut Section: N/A
- Lifespan: 30,000 hours
- Warranty: 3 years
- Certifications: CE ROHS
IP65 Edgelit LED Strip
- Input Voltage: DC12V/DC24V
- Length: 515mm, 995mm
- LED Chips: 10LEDs, 20LEDs, 1W SMD2835
- Power: 10W, 20W
- Efficacy: 140lm/W
- CCT: 3000K, 4000K, 5000K, 6500K
- CRI: >80
- Beam Angle: 10×45°
- IP Rating: IP65
- Cut Section: N/A
- Lifespan: 30,000 hours
- Warranty: 3 years
- Certifications: CE ROHS
How to Replace Fluorescent Lamps With LED Lamps in Your Backlit Sign
LED Retrofit Solutions
LED Retrofit Solutions are a cost-effective way to modernize your lighting systems and significantly reduce energy bills. Our LED retrofit services seamlessly adapt to your current fixtures, providing superior brightness and energy efficiency without needing a full lighting overhaul. We tailor LED retrofits to maximize energy efficiency, reduce maintenance costs, and provide a quick return on investment.
Cabinet Signs
Illuminate your brand and location, day and night, using lighted cabinet signs.
Also commonly called “wall” or “box” signs, cabinet signs are a traditional form of illuminated signage. Cabinet signs allow for an effective way of utilizing large copy area and eye-popping graphics.
The background of the sign can be the element that illuminates and the copy can be either translucent (lighted) or opaque (non-lighted).
Strong and durable, our cabinet sign lights can be used when small letter size or graphical elements make the use of channel letters impractical. Depending on the complexity of each individual cabinet, our cabinet sign lights can be made to fit anyone’s budget.
Cabinet signs are perfect for Businesses, Churches, Schools and much more!
Application
Adapter for LED Signage Lighting
Why Choose SignliteLED?
At SignliteLED, we are dedicated to providing you with the most advanced lighting products to satisfy customers. We control every aspect of our production process, from design to distribution, so you can rely on our knowledge of everything we produce.
Customization
All you need to do is send us your requirements, and we will make your ideas into reality.
Flexible MOQ
Standard models have no MOQ required, making it easy for you to check samples and test the market.
Fast Delivery
We have more than 50 experienced workers and use automated production lines to ensure faster delivery.
Certified Quality
QC Check for all raw materials. All COB LED Strip Lights have passed UL, ETL, LM80, CE, and RoHS tests.
Competitive Price
We are striving to improve production processes and reduce costs to offer the best possible price.
Aftersale Services
All your inquiries and questions will be dealt with promptly and professionally
Frequently Asked Questions
This section contains a few FAQs that our customers ask. If your question is not here, contact us today, and we will answer directly.
Yes, our retrofit tube is ballast bypass design, you need to remove the ballast
They are available in all color options include CCT, RGB and digital RGB options, allowing for a wide range of lighting effects and ambiance control.
Yes, the tube fixture is plastic, no electric shock risk, and it’s ballast bypass design, no fire hazard risk.
Daisy chain sign tube is a fast connection design for new installation, it does not require pre-installed wires and sockets in the signs
Yes, like most LED strips, diffuse reflection LED strips can typically be cut at designated points, allowing you to customize the length to fit your specific application.
The main benefits include reduced glare, even light distribution, a more aesthetically pleasing appearance, and better visual comfort. They are ideal for ambient lighting, under-cabinet lighting, and decorative applications
Unlike regular LED strips that emit light directly outward, edgelit LED strips are designed to spread light across a surface from the edges. This design helps eliminate hotspots and provides even lighting.
DC sign tube is dimmable, you can use PWM controller to dim it. Standard AC tube is not dimmable, if needed, contact us for dimmable version.
Installation typically involves attaching the strip to the edges of a panel or surface. Many edgelit LED strips come with adhesive backing for easy mounting. For larger installations, additional mounting brackets or channels may be used.
Yes, OEM and ODM is available, please tell us your request or application, our professional team will help you to provide whole solution.
