English 
简体中文 
Deutsch 
Español 
Français 
Italiano 
日本語 
한국어 
Polski 
Português 
Русский 
Türkçe 
العربية 
Nederlands 
Single Color 2LED DC12V LED Module Light
Product: SMD2835-2LED-0.6W
Exposed PCB design, good heat dissipation, low light failure, longer life span
9V high power led chips, much brighter, higher efficiency
Constant current design, less voltage drop, can connect more per chain
160degree lens, even illumination, suitable for thin signs
Share
Specifications
Model No.
Voltage
Power
Lumen
Ra
CCT/Wavelength
LED QTY
Beam Angle
QTY/Chain
IP Rating
Model No.
UTM357B UTN357B UTW357B UTC357B UTR357B UTG357B UTB357B UTY357B
Voltage
DC12V
Power
0.6W
Lumen
58lm 60lm 60lm 58lm 26lm 45lm 11lm 14lm
Ra
>80
CCT/Wavelength
3000K 4000K 6000K 9000K 620-630nm 520-530nm 460-470nm 588-594nm
LED QTY
2LEDs
Beam Angle
160°
QTY/Chain
50pcs
IP Rating
IP67
UTM357B
DC12V
0.6W
58lm
Ra>80
3000K
2LEDs
160°
50pcs
IP67
UTN357B
DC12V
0.6W
60lm
Ra>80
4000K
2LEDs
160°
50pcs
IP67
UTW357B
DC12V
0.6W
60lm
Ra>80
6000K
2LEDs
160°
50pcs
IP67
UTC357B
DC12V
0.6W
58lm
Ra>80
9000K
2LEDs
160°
50pcs
IP67
UTR357B
DC12V
0.6W
26lm
Ra>80
620-630nm
2LEDs
160°
50pcs
IP67
UTG357B
DC12V
0.6W
45lm
Ra>80
520-530nm
2LEDs
160°
50pcs
IP67
UTB357B
DC12V
0.6W
11lm
Ra>80
460-470nm
2LEDs
160°
50pcs
IP67
UTY357B
DC12V
0.6W
14lm
Ra>80
588-594nm
2LEDs
160°
50pcs
IP67
Dimensions
Features
Walking in the street at night, we see plenty of advertising signs, such as front-lit channel letter, back-lit channel letter, combination-lit channel letter, lighting box, etc. Its shining and colorful light attracts public attention and helps shift potential customers to business location. LED module light is the device used in those signs, due to its versatility, easy installation, low voltage driving, it has been dominating the signage industry since it was created. Nowadays, it’s used for home decorating, accent lighting, undercabinet lighting, etc.
- Exposed Aluminum Substrate
One of the most significant advantage of this LED module is the adoption of exposed aluminum PCB design, unlike other module totally covered by ABS shell, exposed aluminum is much better on heat exchange with the air, which benefits to LED module of longer lifespan and higher efficiency.
Exposed aluminum PCB
Encased PCB
- 9V LED Chip
Utilizing 9V 0.5watts SMD 2835 LEDs, the higher power LED is, the more light it emits. On the other hand, 3 chips are placed in parallel in this LED, which makes its forward voltage is 9V. Most of modules run at 12Vdc, using 3V LEDs is a waste of energy, because the other 9V is assumed by resistors.
9V SMD2835 LED(3 chips in series)
3V SMD2835 LED(1 chips)
- Uniformity
Most of channel letter’s thickness is less than 10cm, to make it bright and uniform, modules was placed very close to each other a few years ago, as it did not have a lens on it. This LED module use specialized optical lens with 160 degrees beam angle, which ensures the module to cover larger area without hot spot, easier for installation and costs less as well.
LED module light distribution graph: 160°
Best solution for 3-10cm depth channel letter or lighting box
- Color Consistency
Same as uniformity, color consistency is another important matters for signs. This LED module only takes 3-step MacAdam color bin chips, tight color control gives all modules the same color, which ensures signs work uniformly and consistently.
Fantastic color consistency with 3-step SDCM chips
Non-3-step SDCM chips presents big color difference on white signs, some is bluer, some ia warmer
- Constant Current Design
This module comes with a string of 50pcs, even powered from one end, the brightness is totally the same on both ends, it benefits from the design of constant current technology (CCT). It greatly reduces voltage drop problem over the line which would lead to flux drop far from driver.
