160degree Lens for Light Box LED Module 12VDC
Product: SMD2835-1LED-0.3W
Exposed PCB design, good heat dissipation, low light failure, longer life span
9V high power led chips, much brighter, higher efficiency
Constant current design, less voltage drop, can connect more per chain
160degree lens, even illumination, suitable for thin signs
Â
Share
Specifications
Model No.
Voltage
Power
Lumen
Ra
CCT/Wavelength
LED QTY
Beam Angle
QTY/Chain
IP Rating
Model No.
UTM356B UTN356B UTW356B UTC356B UTR356B UTG356B UTB356B UTY356B
Voltage
DC12V
Power
0.3W
Lumen
29lm 30lm 30lm 29lm 13lm 23lm 5.5lm 7lm
Ra
>80
CCT/Wavelength
3000K 4000K 6000K 9000K 620-630nm 520-530nm 460-470nm 588-594nm
LED QTY
1LEDs
Beam Angle
160°
QTY/Chain
50pcs
IP Rating
IP67
UTM356B
DC12V
0.3W
29lm
Ra>80
3000K
1LEDs
160°
50pcs
IP67
UTN356B
DC12V
0.3W
30lm
Ra>80
4000K
1LEDs
160°
50pcs
IP67
UTW356B
DC12V
0.3W
30lm
Ra>80
6000K
1LEDs
160°
50pcs
IP67
UTC356B
DC12V
0.3W
29lm
Ra>80
9000K
1LEDs
160°
50pcs
IP67
UTR356B
DC12V
0.3W
13lm
Ra>80
620-630nm
1LEDs
160°
50pcs
IP67
UTG356B
DC12V
0.3W
23lm
Ra>80
520-530nm
1LEDs
160°
50pcs
IP67
UTB356B
DC12V
0.3W
5.5lm
Ra>80
460-470nm
1LEDs
160°
50pcs
IP67
UTY356B
DC12V
0.3W
7lm
Ra>80
588-594nm
1LEDs
160°
50pcs
IP67
Dimensions
Features
Walking in the street at night, we see plenty of advertising signs, such as front-lit channel letter, back-lit channel letter, combination-lit channel letter, lighting box, etc. Its shining and colorful light attracts public attention and helps shift potential customers to business location. LED module light is the device used in those signs, due to its versatility, easy installation, low voltage driving, it has been dominating the signage industry since it was created. Nowadays, it’s used for home decorating, accent lighting, undercabinet lighting, etc.
- Exposed Aluminum Substrate
One of the most significant advantage of this LED module is the adoption of exposed aluminum PCB design, unlike other module totally covered by ABS shell, exposed aluminum is much better on heat exchange with the air, which benefits to LED module of longer lifespan and higher efficiency.
Exposed aluminum PCB
Encased PCB
- 9V LED Chip
Utilizing 9V 0.5watts SMD 2835 LEDs, the higher power LED is, the more light it emits. On the other hand, 3 chips are placed in parallel in this LED, which makes its forward voltage is 9V. Most of modules run at 12Vdc, using 3V LEDs is a waste of energy, because the other 9V is assumed by resistors.
9V SMD2835 LED(3 chips in series)
3V SMD2835 LED(1 chips)
- Uniformity
Most of channel letter’s thickness is less than 10cm, to make it bright and uniform, modules was placed very close to each other a few years ago, as it did not have a lens on it. This LED module use specialized optical lens with 160 degrees beam angle, which ensures the module to cover larger area without hot spot, easier for installation and costs less as well.
LED module light distribution graph: 160°
Best solution for 3-10cm depth channel letter or lighting box
- Color Consistency
Same as uniformity, color consistency is another important matters for signs. This LED module only takes 3-step MacAdam color bin chips, tight color control gives all modules the same color, which ensures signs work uniformly and consistently.
Fantastic color consistency with 3-step SDCM chips
Non-3-step SDCM chips presents big color difference on white signs, some is bluer, some ia warmer
- Constant Current Design
This module comes with a string of 50pcs, even powered from one end, the brightness is totally the same on both ends, it benefits from the design of constant current technology (CCT). It greatly reduces voltage drop problem over the line which would lead to flux drop far from driver.
