Side-lit LED Light Module for Ultra-thin Light Box
Product: SMD2020-1LED-3W
Exposed PCB design, good heat dissipation, low light failure, longer life span
9V high power led chips, much brighter, higher efficiency
Constant current design, less voltage drop, can connect more per chain
15×55 degree lens, even illumination, suitable for thin signs
Share
Specifications
Model No.
Voltage
Power
Lumen
Ra
CCT
LED QTY
Beam Angle
QTY/Chain
IP Rating
Model No.
UNM383B UNN383B UNW383B UNC383B
Voltage
DC12V
Power
3W
Lumen
270lm 280lm 280lm 270lm
Ra
>80
CCT
3000K 4000K 6000K 9000K
LED QTY
1LEDs
Beam Angle
15×55°
QTY/Chain
20pcs
IP Rating
IP67
UNM383B
DC12V
3W
270lm
Ra>80
3000K
1LEDs
15x55°
20pcs
IP67
UNN383B
DC12V
3W
280lm
Ra>80
4000K
1LEDs
15x55°
20pcs
IP67
UNW383B
DC12V
3W
280lm
Ra>80
6000K
1LEDs
15x55°
20pcs
IP67
UNC383B
DC12V
3W
270lm
Ra>80
9000K
1LEDs
15x55°
20pcs
IP67
Dimensions
Applications
Lighting box
Features
Walking in the street at night, we see plenty of advertising signs, such as front-lit channel letter, back-lit channel letter, combination-lit channel letter, lighting box, etc. Its shining and colorful light attracts public attention and helps shift potential customers to business location. LED module light is the device used in those signs, due to its versatility, easy installation, low voltage driving, it has been dominating the signage industry since it was created. Nowadays, it’s used for home decorating, accent lighting, undercabinet lighting, etc.
- Exposed Aluminum Substrate
One of the most significant advantage of this LED module is the adoption of exposed aluminum PCB design, unlike other module totally covered by ABS shell, exposed aluminum is much better on heat exchange with the air, which benefits to LED module of longer lifespan and higher efficiency.
Exposed aluminum PCB
Encased PCB
- 9V LED Chip
Utilizing 9V 0.5watts SMD 2835 LEDs, the higher power LED is, the more light it emits. On the other hand, 3 chips are placed in parallel in this LED, which makes its forward voltage is 9V. Most of modules run at 12Vdc, using 3V LEDs is a waste of energy, because the other 9V is assumed by resistors.
9V SMD2835 LED(3 chips in series)
3V SMD2835 LED(1 chips)
- Uniformity
Most of channel letter’s thickness is less than 10cm, to make it bright and uniform, modules was placed very close to each other a few years ago, as it did not have a lens on it. This LED module use specialized optical lens with 15×55 degrees beam angle, which ensures the module to cover larger area without hot spot, easier for installation and costs less as well.
LED module light distribution graph: 15x55°
Best solution for 3-10cm depth channel letter or lighting box
- Color Consistency
Same as uniformity, color consistency is another important matters for signs. This LED module only takes 3-step MacAdam color bin chips, tight color control gives all modules the same color, which ensures signs work uniformly and consistently.
Fantastic color consistency with 3-step SDCM chips
Non-3-step SDCM chips presents big color difference on white signs, some is bluer, some ia warmer
- Constant Current Design
This module comes with a string of 20pcs, even powered from one end, the brightness is totally the same on both ends, it benefits from the design of constant current technology (CCT). It greatly reduces voltage drop problem over the line which would lead to flux drop far from driver.
